I only realized over the weekend that I never got to fix our snow plow. I think it's hydraulic system was malfunctioning last winter as the blade pulsated when moving up and down. I could use it intermittently so I totally forgot the issue end of season. It's now in storage in our other garage and I'm concerned that that will further contribute to the problem. I'm also not sure if I could get it fixed around this time of the year. Maybe the most I can do right now is find the best storage conditions for it? Any suggestions?
2023 Fisher VX2 hydraulic system problem
- Thread starter brxn505
- Start date
the pulsating blade certainly sounds like a hydraulic issue.. possibly air in the system, a failing pump, or a relief valve problem. leaving it as is in storage probably won't further damage it much more than it already is, but it's definitely not ideal..
as for getting it fixed now, you might actually be in luck. the off-season for plow repair shops could mean more availability and might even offer better rates before the pre-winter rush. it's worth calling a few local hydraulic or plow repair shops now to see about scheduling a diagnostic. if you can't get it in, just ensure it's stored somewhere dry and protected from the elements..
I agree with the guys, that pulsating is almost always air in the system. It's common and not usually a huge deal so storing it won't make the problem worse, but also it's not going to fix itself either.
If you're handy, a basic fluid and filter change will probably take care of it. The key is to bleed the system properly after, and while you're under there, check for any slow leaks that could be letting air in. But if you'd rather not mess with it, don't wait for the last minute. The smaller plow shops might be already booked with preseason work, so try getting on their schedule soon or try contacting a commercial truck or heavy equipment shops!
icdgtrnk.656
New member
- Joined
- Aug 25, 2025
- Messages
- 2
I've had the same pulsating issue before, and I agree with @Stu.44 that the best thing you can do right now is to try to bleed the system. t's a pretty straightforward process and there are tons of tutorials online. A local shop might be a little busy right now with pre-season checks and installs, but it's also worth a call!! If you can't get it to a shop, just take it slow and be careful when doing it yourself. Definitely something you want to get sorted before the snow flies!!